Ashdown Dual Band Compression

The Ashdown Dual Band Compression Bass effects pedal is a special type of compressor effects specially for bass guitar, bass guitar layout of the signal in two frequency bands and the use of compression designed pedal to each band individually. The low frequency band or with a basic attack and slow decay and the frequency with high power fast attack and decay. The two bands are then combined again in a signal range of the balance between high and low frequencies with adjustable Dual Band Compression Pedal EQ balance knob.

The impact Ashdown Dual Band Compressor Pedal uses True Bypass switching, which means that if the effects pedal is bypassed, then all the electronic components are mounted on the pedal came out of the loop. The input jack is then directly and exclusively to the output jack jack securely connected no degradation of the signal from your bass. Most effects pedals connected to internal circuitry, even if the effect is bypassed. This changes and degrades the signal low. With true bypass switching, if it ignores the effect is the same as if the bass were made directly to the input of your amplifier.

The Ashdown Dual Band Compression Bass Pedal is housed in a metal casing and has an input level control meters around the trademark Ashdown VU signal to allow an optimal matching of each bass, active or passive. The pedal has also control an output level, essential for maintaining the perfect balance between effect and the true bypass mode.

ASHDOWN BASS DUAL BAND COMPRESSOR PEDAL SPECIFICATIONS

High pass filter section filter frequency: 225Hz.
Filter roll off: 12dB/octave.
Low pass filter section filter frequency: 900Hz.
Filter roll off: 12dB/octave.
Composite crossover point of the overlapping High and Low pass filters:
350Hz.
High compression attack time: 1mS.
Decay time: 70mS.
Max comp ratio: 8:1.
Low compression attack time: 22mS.
Decay time: 122mS.
Max comp ratio: 8:1.
Input Impedance: 470k Ohms.
Signal level: -10dBv to 0dBv.
Output Impedance 10k Ohms.
Signal level variable: -10dBv to 0dBv
Power Supply: Internal 9v battery.
External Supply: 9v DC adaptor Centre pin negative.